Elektrobock CS3-4M
Elektrobock CS3-4M
The Elektrobock CS3-4M timer is designed for switching fans. It is equipped with the possibility of mounting under the switch. It is a multifunctional time relay that controls resistive loads such as light bulbs and inductive loads such as fans. No neutral wire is required for installation. Eight switching functions are available. The Elektrobock CS3-4M is powered by 230 V / 50 Hz. No neutral wire is required for installation. It boasts an adjustable time from 1 to 1,200 minutes. You will appreciate the IP20 protection rating. The Electrobock CS3-4M operates at temperatures ranging from 0 to 50 °C.
Key features of Elektrobock CS3-4M time switch
- Elektrobock CS3-4M timer switch is designed for switching fans
- It can be mounted under the switch
- It is a multifunctional time relay
- 230 V is required to power the Elektrobock CS3-4M time switch
- No neutral wire required for installation
- Eight switching functions are available
- Appreciate the IP20 degree of protection
- Elektrobock CS3-4M timer is adjustable from 1 to 1200 minutes
Eight switching functions of the Elektrobock CS3-4M time switch
Choose one of eight options for using the Elektrobock time switch. The first interrupt function allows the load and timing to be switched immediately after the button is pressed. The load can be switched off by pressing again. The second function is a delayed shutdown, where the load is switched on when the button is released. After timing out, the load is switched off. The third option is multi time relay with interlocking,where you multiply the set time by a maximum of 5 presses. The sixth press will reset the time. Press for 3 seconds to switch off the load. The fourth function boasts a time relay with no interrupt option, where the load is switched on immediately after the button is pressed. After timing out, the load is switched off. The fifth function allows control from multiple locations. The sixth function sets the delayed switching. The seventh function allows delayed on and off. The eighth function is a flasher, whereby when the button is permanently pressed, the load is switched at set time intervals of 1:1.
Resistance load:
15 to 200 W
Inductive load:
15 to 100 VA
Power consumption:
1 W
Clamping element:
Triac
Collateral:
FU 2 A/ H 5 × 20 mm
Specifications
Use
Male connectors
Connector
Cable construction
Features
Input voltage
Design
Control
Power outlet type
Elektrobock MTF s.r.o., Blanenská 1763/30, Kuřim 664 34, Česká Republika, +420 541 230 216, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
