Processor cooler Thermaltake V1
Don't like the alternatives? Choose from the full product list
Processor cooler Thermaltake V1
Discontinued
Processor cooler Thermaltake V1
Heatpipe technology is based on the principle of a closed tube, where the "heated" the end is a liquid with a low boiling point, which is beginning to evaporate by heating in the gas phase rises to the "cooled" the end where it condenses on the walls and the tube is returned in the liquid state back .When heating liquids, waste heat from the chip is used to change the state and then in the form of hot steam goes to the opposite end, which must be cooled to a temperature at which vapor condenses.Compared to classical convention offers Heatpipe technology is higher heat transfer efficiency, but only if sufficient temperature difference between the two ends of the tube and its correct orientation.
Specifications:
Supported sockets:
Intel ® Core i7 (Socket LGA1366)
Intel ® Core i7 (Socket LGA1366)
Intel ® Core 2 Extreme (Socket LGA775)
Intel ® Core 2 Quad (Socket LGA775)
Intel ® Core 2 Duo (Socket LGA775)
Intel ® Pentium D (Socket LGA775)
Intel ® Pentium 4 (LGA 775)
Intel ® Celeron D (Socket LGA775)
Intel Celeron ® (Socket LGA775)
AMD ® Phenom (AM2 +)
AMD ® Phenom II (AM2 +)
AMD ® Athlon 64 FX (Socket AM2/939)
AMD ® Athlon 64 X2 (SocketAM2/939)
AMD ® Athlon 64 (Socket AM2/939/754)
AMD ® Sempron (Socket AM2/754)
Material:
Core:copper
Ribbing:aluminum
Heatpipe:
Number of tubes:4 x 6 mm copper tubing
Material:copper
Fan:
Dimensions:110 x 25 mm
Noise:16 to 24 db
Speed:1300 - 2000 RPM
Connector:
3-pin (PWM)
Dimensions:
147 x 92 x 143 mm
Weight:
637 g
Note:
This product is not an independently functional unit and may require professional installation.
Specifications can be changed without notice. Images are for illustrative purposes only.
