Enermax PRO82+ 385W

Reliable power supply to power 385 W, which fully complies with the standard ATX 2nd3rdSource has two separate branches and 12 in the declared exercise is achievable without significantly decrease tension on the individual branches.Its effectiveness is at full load above 82%, while optimizing the consumption system provides active PFC.The cooling of the old model of 120 mm fan and a specially crafted design for a better flow of air from the vicinity of the fan.

Source has the power 20/24-pinovým along with a 4 +4- pin 12 in the connector, the connector for PCI-Express graphics card, four power connectors for Serial ATA drives, six molex connectors and one connector for the disk drive.Source is suitable for conventional home and office kits and small servers, as can power up to 11 hard disks, is tailored for non-stop work, and supports dual or čtyřjádrové processors.

The parameters and specifications:

Main features:
Output:385 W
Standard:ATX 2nd3
PFC:Active
Effectiveness:> 82%
Dimensions:150 x 140 x 86 mm
Number 12 in the branches of power:2 branches

Connectors:
1 x 20/24-pin ATX (45 cm)
1 x 4 +4- pin connector (45 cm)
6 x 4-pin Molex (45 / 55 / 65 / 75 cm)
4 x Serial ATA (45 / 55 / 65 / 75 cm)
1 x 6-pin PCI-Express (45 cm)
1 x Floppy connector
1 x FAN connector (45 cm)

Fan:
Dimensions:120 x 120 x 25 mm
Color performance:black

Loading:
+ 3.3 V - A 20
+ 5 V - A 20
+ 12 in the 1 to 20 A
+ 12 V 2 - A 20
-12 V - A 0.6
In sb + 5 - 3 A