CTEK MXS 5.0

Cold winter evenings, when the car's battery had to work much harder, are coming closer. However, a fully charged battery is a prerequisite for easy starting. If you are not sure about the state of your car's battery, it's a great idea to buy a charger that works perfectly.  The product from CTEK is a high-quality charger with microprocessor control charging technology. The new version of the MXS 5.0 is additionally equipped with a temperature sensor to ensure ideal charging even under extreme external conditions. You can now safely forget about worrying about your car battery.

Key features

• Designed in extremely cold conditions (up to -30°C)
• Stable charging current up to 5 A
• Temperature sensor for trouble-free charging during extreme temperatures
• To restore deeply discharged batteries
• For 12V rechargeable batteries with a capacity of 1.2 to 110 Ah, up to 160 Ah for maintenance charging
• Complies with protection class IP65
• Compact dimensions

Easy connection

The package includes a connector with terminals for quick connection to the battery. It is a practical solution for those looking for an easy way to combine different batteries, for example in a workshop. You will also be pleased with its optimal length and colour resolution, which guarantees faultless connection.

Under the supervision of the microprocessor 

This universal battery charger is controlled by a microprocessor and is fully automatic 8-speed. When the charging is complete, the charger automatically switches to the maintenance status, thus avoiding overcharging and subsequent damage to the battery. The charger is designed for all 12V lead-acid batteries. You will also appreciate the pulse charging function (Float / Pulse), based on the principle of alternating charging and discharging. The charger solves a broad range of battery problems. The patented Float/Pulse maintenance makes the charger ideal for long-term maintenance. This helps to maintain the optimal condition of the battery. The charger is able to start both the deeply discharged batteries and the stratified electrolyte batteries.

Notice

• For charging in Recond mode, the battery must be disconnected from the wiring and charging the battery out of the car. This is a mode in which controlled electrolyte mixing is performed and the charger charges the battery at a higher voltage than other modes. 
• Recond mode cannot be used for Gel Electrolyte (AGM)
• It is recommended to use it only for deeply discharged batteries, where the electrolyte is deposited (bottom thicker, upright). This mode should be used once or at most 2 times per year.
• If it is not a maintenance-free battery and therefore has loose lids, it is necessary to leave the lid open during charging.

Additional information:

Battery types:
All 12V lead-acid batteries (wet, MF, Ca / Ca, AGM and GEL)

Dimensions:
165 × 61 × 38mm (L × W × H)

Insulation class:
IP65