Archive - Tool Accessories
Choose an alternative in the category
Tool Accessories
5,151
Results
Discontinued
Order Code:
BOCh5961
Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
Discontinued
Order Code:
BOCh5971
Replacement Filter Suitable for Bosch GBH 2-23 REA drilling hammer. This filter is a replacement accessory for dust boxes.
Discontinued
Order Code:
BOCh5989
Discontinued
Order Code:
BOCh5973
Discontinued
Order Code:
BOCh5950
Electric Tool Accessory The wrench is used for tightening and loosening 14mm locknuts. It is compatible with the GGS 16 Professional straight grinder.
Discontinued
Order Code:
BOCh5948
Cup Brush The Clean for Metal wire brush provides a very fine surface finish. The cup brush is equipped with a crimped wire for less and medium-duty cleaning. Ideal for metal, suitable for cleaning medium and large steel surfaces, e.g. for removing coatings and rust and for cleaning formwork boards and tiles. The pot brush is also suitable for roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It is designed for use with angle grinders with M14 thread.
Discontinued
Order Code:
BOCh5922
Cup Brush The pot wire brush provides excellent fine surface finish. It is equipped with a crimped wire for less and moderate cleaning. It is suitable for removing coatings and rust and for cleaning formwork and cladding boards. This brush is ideal for use on steel surfaces and is also suitable for roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
Discontinued
Order Code:
BOCh5926
Discontinued
Order Code:
BOCh5928
Cup Brush The Heavy for Metal wire brush provides a very coarse surface finish. This pot brush features a braided wire for powerful cleaning. Ideal for metal, suitable for cleaning medium and large steel surfaces, e.g. removal of rough rust, protective coatings, paints and varnishes. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It is designed for use with angle grinders with M14 thread.
Discontinued
Order Code:
BOCh5921
Depth-stop Drill Bit The Basic attachment for checking the depth of cut allows you to monitor the depth of cut when using segment saw blades, for example when replacing individual parquet floors. Allows four-stage setting defining the limitation of the depth of cut. It is designed for use with all materials. Cutting depths for segment saw blades with a diameter of 85 mm: 8, 10, 12 and 14 mm depth of cut for segment saw blades with a diameter of 100 mm: 14, 16, 18 and 20 mm This depth of cut check attachment is suitable for use with all Starlock, Starlock Plus and Starlock Max tools as well as with standard Bosch multifunction tools.
Discontinued
Order Code:
BOCh5916
Cup Brush The Heavy for Metal wire brush provides a very coarse surface finish. This pot brush features a braided wire for powerful cleaning. Ideal for metal, suitable for cleaning medium and large steel surfaces, e.g. removal of rough rust, protective coatings, paints and varnishes. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It is designed for use with angle grinders with M14 thread.
Discontinued
Order Code:
BOCh5920
Cup Brush The Heavy for Metal wire brush provides a very coarse surface finish. This pot brush features a braided wire for powerful cleaning. Ideal for metal, suitable for cleaning medium and large steel surfaces, e.g. removal of rough rust, protective coatings, paints and varnishes. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It is designed for use with angle grinders with M14 thread.
Discontinued
Order Code:
BOCh5919
Discontinued
Order Code:
BOCh5898
Adapter with Female Thread The optional adapter package includes various adapters that allow Bosch Power Change systems to be used with punches from competitors such as Starrett, Baco and Lenox. This package includes two adapters for 14-30 mm diameters (1/2-inch 20UNF thread) and four adapters for 32-210 mm diameters (5/8-inch 18UNF thread).
Discontinued
Order Code:
BOCh5852
Adapter with Female Thread
Discontinued
Order Code:
BOCh5853
Adapter with Female Thread It is designed for use with the GOF 2000 CE Professional. The spare adapter connects the suction hose to the cutter.
Discontinued
Order Code:
BOCh5844
Adapter with Female Thread It is designed to work with a milling machine. The adapter is a spare part for connecting the suction hose to the power tool.
Discontinued
Order Code:
BOCh5843
Adapter with Female Thread The 1/2-inch threaded adapter allows the use of standard punches up to 32 mm diameter in the quick-release adapter without the need for tools. The transition adapter allows the complete range of standard punches from 14 mm to 210 mm diameters to be used with the Quick Change adapter without the need for tools.
Discontinued
Order Code:
BOCh5871
Adapter with Female Thread Suitable for use with all SDS plus hammers with stop rotation function. The SDS plus adapter connects the punch to the power tool and allows the use of punches with SDS plus hammers with stop-rotation function.
Discontinued
Order Code:
BOCh5866
Adapter with Female Thread It is compatible with both corded and cordless drilling screwdrivers. The hexagon adapter is designed to use the punch with power tools with mandrel.
Discontinued
Order Code:
BOCh5869
Adapter with Female Thread Suitable for use with all SDS plus hammers with stop rotation function. The SDS plus adapter connects the punch to the power tool and allows the use of punches with SDS plus hammers with stop-rotation function.
Discontinued
Order Code:
BOCh5865
Adapter with Female Thread It is compatible with both corded and cordless drilling screwdrivers. The hexagon adapter is designed to use the punch with power tools with mandrel.
Discontinued
Order Code:
BOCh5868
Adapter with Female Thread It is compatible with both corded and cordless drilling screwdrivers. The hexagon adapter is designed to use the punch with power tools with mandrel.
Discontinued
Order Code:
BOCh5864