Most expensive 3D Printer Filament
This page includes the most expensive 3D Printer Filament, or more specifically all products from the category 3D Printer Filament sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out.
1,026
Results
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 210°C, print mat temperature: 65°C
Discounted -9 %
4,580 Ft
5,060 Ft
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ELEEG250812
Filament - made from PETG, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 90°C
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
Discounted -9 %
4,580 Ft
5,080 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ALZMNTP04
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
Discounted -9 %
4,580 Ft
5,080 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ALZMNTP02
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 200mm/s
4,490 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ANYC251208
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 65°C
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
4,490 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRFE_02
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 800mm/s
4,480 Ft
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF607u
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 800mm/s
4,480 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF607s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 800mm/s
4,480 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF607m
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 800mm/s
4,430 Ft
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF607w
Filament , filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 0,1kg, recommended print speed: from 40mm/s to 60mm/s
4,390 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF5334a
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 200mm/s
4,290 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ANYC251210
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 250°C, recommended print speed: from 50mm/s to 100mm/s
Discounted -10 %
4,120 Ft
4,590 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250741
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 250°C, recommended print speed: from 50mm/s to 100mm/s
Discounted -10 %
4,120 Ft
4,590 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250743
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 250°C, recommended print speed: from 50mm/s to 100mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
Discounted -10 %
4,120 Ft
4,590 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250705
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
Discounted -10 %
4,120 Ft
4,590 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250704
Chcete doručit do České republiky? Jdi na
Filamenty pro 3D tiskárny
Chcete doručiť tovar na Slovensko? Prezrite si
Filamenty do 3D tlačiarne
Für den Versand nach Deutschland, besuchen Sie bitte
3D-Drucker-Filamente
Für den Versand nach Österreich, besuchen Sie bitte
3D-Drucker-Filamente