AMIO Headlight Refurbishing Polishing Kit (pack for two headlights)
- Reviews 6
- Help and manuals
- Specifications
- Photos & Videos 4
- Alternatives 5
- Accessories and suggested products
AMIO Headlight Refurbishing Polishing Kit (pack for two headlights)
The AMIO Headlight Restoration and Polishing Kit is designed to restore the original appearance of very dull and yellowed headlights. 3 simple steps: sanding, polishing, protecting. Using this kit means you don't have to replace your headlights with new ones. The kit does not include an electric polisher. Designed to restore two headlights.
Key Features of the AMIO Headlight Restoration and Polishing Kit (pack for two headlights)
- Kit designed for headlight restoration and polishing
- Suitable for two headlights (complete package)
- Contains polishing pastes and abrasive materials to remove scratches and yellow haze
- Easy to use – also suitable for home use
- Restores the clarity and transparency of plastic headlights
- Extends headlight lifespan and improves driving safety
Preparation
Clean the headlight with water. Cover the area around the headlight to avoid scratching nearby painted surfaces.
1. SANDING: Wet the sanding disc and attach it to the backing pad. Sand with three different grits to completely remove heavy yellowing, clouding, and corrosion.
NOTE: Use the sanding discs in the following order: P800, P1200, P2000.
2. POLISHING: Attach the wool polishing pad and apply the polishing paste to it. Polish the headlight until its original shine is restored.
NOTE: For best results, use an electric polisher. If polishing by hand, make at least 200 clockwise circular motions.
3. PROTECTION: Before proceeding with this operation, clean the headlight lens and ensure it is dry. Make sure the headlight is not exposed to sunlight (VERY IMPORTANT). Using the white sponge included in the kit, evenly apply a layer of protective fluid to the surface of the headlight. Let the protective fluid dry for 15 minutes. Then, let the fluid cure in direct sunlight for 1 to 2 hours.
4. AFTER STEP 3: Leave the headlight in a dry place and do not expose it to moisture. Do not wash the car for 24 hours.
NOTE: When applying the protective fluid to the headlights, avoid sunlight (VERY IMPORTANT).
Package contents: 2× P800 sanding disc, 2× P1200 sanding disc, 2× P2000 sanding disc, 2× sponge (1× white, 1× orange), 1× 85g polishing paste, 2× 3ml UV protection, 1× masking tape (300*2cm), 1× disc holder, 1× M10 thread adapter
Specifications
Use
Volume
Function
Packaging
Use
Colour
ACI Auto Components International s.r.o.,Podnikatelská 549, 190 11 Praha 9 - Běchovice, [email protected], www.aci.cz
Specifications can be changed without notice. Images are for illustrative purposes only.
