AXAGON HMC-6GL 6-in-1 Hub, USB-C 5Gbps, 3x USB-A, HDMI 4k/30Hz, RJ-45, PD 100W, USB-C cable 20 cm

The AXAGON HMC-6GL multiport USB-C 3.2 Gen 1 hub expands your laptop, computer or phone with six ports. You can quickly and easily connect up to three USB devices, a Gigabit Ethernet network and an HDMI display to your computer at the same time via the double-sided USB-C connector. You also get the option to power your laptop using Power Delivery technology. The USB-C hub provides you with a simple and compact 6-in-1 docking station for a laptop such as a MacBook Pro. The USB hub offers three USB outputs with standard USB-A connectors. The hub can handle the permanent connection of several external drives at the same time. Thanks to the fast USB 3.2 Gen 1 interface, the hub's transfer speed is up to 5Gbps. The hub also allows you to charge phones and tablets with a current of up to 1.5A/5V, so you can easily charge an Android smartphone, Apple iPhone, Apple iPad, etc. from the hub. The USB-C connector is reserved only for powering and simultaneously charging phones or laptops using Power Delivery 3.0 technology with a power of up to 100W. You plug a USB-C Power Delivery charger into the hub and connect the hub to your laptop. This also frees up one USB-C port. The prerequisite is a laptop with support for charging from a USB-C port using Power Delivery and a suitable PD charger. A higher surface temperature of the hub is not a problem; the heat generated by the hub's operation is better dissipated and transferred to the surroundings.

Plug and Play and Hot Plug

The elegant aluminium body ensures not only mechanical durability but also high-quality cooling. The glossy upper part with a discreetly backlit logo underlines the premium look of the hub. The port replicator is an ideal accessory for laptops without USB-A connectors, a network card and a video output. You can use your existing USB peripherals in the hub without having to buy new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and you can also easily connect and disconnect peripherals while the computer is running. The hub is not afraid of connecting to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone.

Package contents:
USB-C hub with a fixed 20cm cable, multilingual manual

Dimensions:
13×110×35mm

Weight:
60g

USB-C cable length:
20cm

Input:
1× USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector
Backwards compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0.
Compatible with Thunderbolt 3
Connecting USB type C male connector located on a fixed 20cm cable

USB outputs:
3× SuperSpeed USB port, USB-A female connector
1× USB type C Power Delivery port (charging only), USB-C female connector
Supports transfer speeds of 5000/480/12/1.5Mb/s (SuperSpeed / High / Full / Low speed)
The total throughput / transfer speed is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5Gbit/s)
The USB-C hub can handle the connection of several external drives at the same time
Charging mobile devices (including iPad) with a current of up to 1.5A in each of the hub's USB ports. The total charging current (which is divided between the ports) reaches up to 2.1A at 5V (depends on the capabilities of the computer's USB port).

HDMI output:
HDMI
HDMI A (F) female connector
Maximum supported resolution 4K/4096×2160 at 30Hz
WQHD resolution 2560×1440 at 60Hz max
FullHD resolution 1920×1080 at 60, 100, 120Hz max
For the video output to function, the hub must be plugged into a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a USB-C port with Thunderbolt 3 support. At the same time, support from the device (laptop, phone) and operating system is required. Without this support, the video output function will not be available.
HPD (Hot-Plug-Detect) support
TMDS (Transition Minimized Differential Signalling) support
Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection)
Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats
Supports sampling rates up to 192kHz and up to 24-bit audio – depends on the source and end device, i.e. laptop/phone and TV/monitor/AV receiver.

RJ-45 output:
Gigabit Ethernet interface with RJ-45 connector for connection with a UTP or STP cable
Supported transmission speeds of the Ethernet interface 10/100/1000Mb/s
Supported specifications IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T
10/100/1000Mb/s auto-detection
Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum checking and generation
Supports TCP Large Send Offload V1 and V2
Supports IEEE 802.1P Layer 2 priority encoding & decoding
Supports IEEE 802.1Q VLAN tagging
Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduced power consumption at rest
Supports Jumbo frame
Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control
Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables
Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors
Supports pair swap/polarity/skew correction
Wake-on-LAN function in different modes: Supports sleep mode and remote wake-up using Magic packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change wake-up.
Advanced Power Management features: The adapter supports advanced power management and advanced power saving, e.g. when the Ethernet cable is disconnected. Supported Power Management technologies include Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and others.

Power Delivery:
Power Delivery 3.0 support – pass-through device charging from the mains adapter via the USB-C hub.
Maximum charging power via the PD USB-C hub output 100W – 20V/5A
PD support from the device (laptop, phone) and a suitable PD mains adapter is required.

Supported operating systems:
Microsoft Windows 10 / 11, Mac OS, Linux, Android and Chrome OS
Compatibility depends on the operating system used and support from the device manufacturer.
Note 1: Drivers are included with the supported operating systems and are installed completely automatically. No other drivers need to be installed.
Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated operating systems and also depends on support from the device (laptop, phone).