Wilckens Garage concrete floor paint, Garagen Boden Beschichtung 2,5 l, grey WI.11672200080

Wilckens Garage concrete floor paint, Garagen Boden Beschichtung 2,5 l, grey WI.11672200080
The special paint for concrete garage floors Wilkens Garagen Boden Beschichtung 2.5L, grey WI.11672200080 is a water-thinnable, low-solvent, and low-odour formula for both interior and exterior use. The paint is resistant to tyres, abrasion, oils, weathering, and water. It is suitable for all mineral substrates, including concrete, screed, fibre cement boards, and old roof tiles. The cured paint is resistant to the migration of plasticisers from car tyres, which prevents localised peeling. The paint has good resistance to alkalis, acids, salts, engine oil, brake fluid, diesel, and heating oil. It is resistant to petrol for short periods. The paint is viscoplastic, with good resistance to UV radiation and weathering. All shades of the product can be mixed with each other but cannot be combined with other products.
Key features of the Wilckens paint for concrete garage floors, Garagen Boden Beschichtung, 2.5L, grey WI.11672200080
- Interior and exterior paint
- Water-thinnable, low-solvent, and low-odour
- Resistant to oils, weathering, and water
- Viscoplastic, resistant to plasticiser migration
- Good resistance to alkalis, acids, salts, engine oil, brake fluid, diesel, and heating oil
- Resistant to petrol for short periods
- Good UV resistance
- Compatible shades can be mixed together
- Suitable for all mineral substrates, concrete, screeds, fibre cement boards, and old roof tiles
Use
The paint is used to seal garage floors and normally stressed mineral surfaces such as warehouses, industrial halls, workshops, balconies, or cellars. Its resistance to abrasion, tyres, and chemicals also makes it suitable for old fibre cement roof tiles and exterior surfaces. The substrate must be clean, dry, sound, and free from rising damp. The paint can be applied with a brush or roller, with a recommended coverage of 6–7m²/L per coat.
Application process
The substrate must be clean, dry, sound, and absorbent. Mechanically remove old joints and loose layers. Concrete and screed must have cured for at least 1 month. Roughen smooth surfaces and, for exteriors, remove moss and algae with a high-pressure cleaner. Check the adhesion of old coats, remove loose layers and repair any defects. For problematic substrates or renovations, apply 1 coat of Wilckens 2C two-component product to promote adhesion. Apply the paint evenly in thin layers with a brush or roller; 2–3 coats are recommended for concrete and screed and 1–2 coats for old paintwork, ensuring you use the same batch when using multiple containers. At a temperature of 20°C and 65% relative humidity, the paint is dust-dry after 2 hours, touch-dry after 6 hours, walkable after 24 hours, and can take a full load after 6 days. Lower temperatures and higher humidity will prolong the drying time. Clean tools with soap and water immediately after use. Do not apply the paint at temperatures below +8°C or on hot surfaces exposed to direct sunlight.
Use: Interior and exterior
Base: Water-thinnable, low-solvent
Properties: Low-odour, viscoplastic, resistant to abrasion, oils, tyres, weathering, and water
Chemical resistance: Alkalis, acids, salt solutions, engine oil, brake fluid, diesel, heating oil; petrol for short periods
UV resistance: Good
Substrates: Concrete, screed, fibre cement boards, old roof tiles – mineral substrates
Consumption / yield: 6–7m²/L per coat
Dilution: With water
Tools: Brush, roller
Tool cleaning: Immediately after use with soap and water
Drying time at 20°C and 65% relative humidity: Dust-dry: 2 hours, touch-dry: 6 hours, walkable: 24 hours, can take a full load: 6 days
Minimum application temperature: +8°C
Scope of application: Not suitable for very hot surfaces exposed to direct sunlight
Specifications
Usage
Technical parameters
Features
Packaging
Features
Wilckens FArben GmbH, Schmiederstrasse 10, Gluckstadt D-25348, Německo, +420731737285, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.

