COMPASS parking assistant 4 sensors, LED display, wireless
COMPASS parking assistant 4 sensors, LED display, wireless
You can enhance your car with a modern system that makes parking a walk through the park. This parking assistant will display the distance by means of LED indicators and a numeric indicator so you will be able to see the remaining space behind your vehicle. It also signals distance with a beep. Just put your car in reverse to activate the system. The sensors operate on an ultrasonic wave principle so they reliably capture any fixed obstacle (both metallic and non-metallic). Sensors are mounted in the rear bumper, and the corresponding drill bit is supplied. The display of this model comes with only power cabling, and wireless data transfer from the control unit makes it easy to install the display and easy to use.
The key features of the parking sensor COMPASS
- Display with wireless data reception
- Complete system to simplify parking
- Indicators, display and sound signals give you an overview of the area behind the ca
- Reliably detects solid obstacles (ultrasound detection)
- Obstacle detection up to 2.5m
- Rear bumper mounted sensors (including a suitable drill)
Parameters and Specifications:
Sensors:
Obstacle detection: up to 2.5m
Frequency: 40kHz
Operating temperature: -20°C to+70°C
Scan angle: vert. 60°; horiz. 120°
Number of sensors: 4
Sensor mounting hole: 22mm
Sensor colour: black, glossy
Power supply:
Standard: 12V (10.5 to 16 V)
Power consumption: 40-300 mA
Packaging:
Display
4 sensors for rear bumper mounting
Corresponding cabling
Drill of corresponding diameter
Specifications
Number of sensors
Scanning angle
Package contents
Features
Detection distance
Compass CZ s.r.o., Pražská 17, 250 81 Nehvizdy, CZ, [email protected]
Compass CZ s.r.o., Pražská 17 250 81 Nehvizdy, [email protected], +420 326 702 532
Specifications can be changed without notice. Images are for illustrative purposes only.
