CyberPower UT650EG-FR
CyberPower UT650EG-FR
The CyberPower UT650EG-FR uninterruptible power supply ensures power protection for computers and network equipment. It uses line-interactive topology with Automatic Voltage Regulation (AVR), which stabilises network fluctuations without switching to battery power. With a real power output of 360W and an apparent power of 650VA, it powers your connected electronics. The patented GreenPower UPS Bypass design reduces energy consumption while extending battery life. The technology also helps to lower the device's operating temperature. The UPS has a compact tower design. Clear LED indicators show the operating mode, battery status or any faults. The system is complemented by audible alarms that warn of critical conditions such as a low battery, overload or UPS failure. The power supply is also compatible with generator power, which expands its deployment options.
Key features of the CyberPower UT650EG-FR uninterruptible power supply
- Provides a real power output of 360W and an apparent power of 650VA for connected devices
- Patented GreenPower UPS technology reduces energy consumption and operating temperature
- Data network protection with speeds of up to 1Gb/s and telephone line protection via RJ-45/RJ-11 ports
- Generator power support extends usability during long-term outages
- The output voltage on battery power has a simulated sine wave form
- Audible and LED indicators provide an instant overview of the device's status
- Runtime at 90W load is 16 minutes
Voltage stabilisation and battery operation
The uninterruptible power supply works with line-interactive topology, which includes Automatic Voltage Regulation (AVR). This feature corrects undervoltage and overvoltage without using the battery, maintaining a stable 230V output. In the event of a complete power failure, it switches to battery power with a typical transfer time of 4ms. The battery provides power for 28 minutes at a 60W load or 16 minutes at a 90W load. A full battery recharge takes 6 hours.
Protection features and connection options
The device protects connected electronics against power surges with an energy absorption of 150J. An integrated EMI and RFI filter suppresses electromagnetic and radio-frequency interference. In addition to the power sockets, it also protects the data and telephone line through combined RJ-11/RJ-45 ports. The network port protection supports transfer speeds of up to 1Gb/s. Built-in overload protection prevents damage to both the power supply and connected appliances. The UPS offers three Type E output sockets for powering appliances. All three ports provide both battery backup and surge protection. The unit connects to the mains with an integrated 1.2-metre cable with a Schuko plug. The input circuits operate with a voltage of 165 to 290V and automatically detect a frequency of 50 or 60Hz. This enables the UPS to work with different power grids without manual setup.
Technical specification
- Frequency bands: 50Hz, 60Hz
- Ports: RJ-11/RJ-45, 3× Type E (FR) output socket
- Protection: Overload protection, surge and spike protection, phone/fax/modem/DSL/network protection
- Operating temperature: 0–40°C
Specifications
Performance
Efficiency
Power outlet type
Output type
Dimensions
Weight
Cyber Power Systems, B.V., Flight Forum 3545, 5657 DW Eindhoven, Netherlands, [email protected], +31-(0(40-234-8170
Specifications can be changed without notice. Images are for illustrative purposes only.
