EATON UPS 93PS 10kW (3 or 1)/1phase
EATON UPS 93PS 10kW (3 or 1)/1phase
The Eaton UPS 93PS three-phase uninterruptible power supply with a 10kW output protects critical applications in data centres and industrial environments. As an online double-conversion UPS, it continuously filters input power anomalies and supplies a stable, clean sine wave to the output with zero transfer time. With a 1:1 power ratio, it provides a real power of 10000W and an apparent power of 10000VA. The integrated battery string (9Ah) powers connected devices for 20 minutes at half load. The total operating efficiency is 96%, but in Energy Saver System (ESS) or eco mode, this increases to up to 99%, reducing both operating costs and heat loss. The Tower design, measuring 950 × 335 × 750mm and weighing 188kg, requires a solid floor and sufficient handling space.
Key features of the Eaton UPS 93PS 10kW 3/3-phase uninterruptible power supply
- Online double-conversion topology ensures a continuous supply of clean power
- Parallel connection of up to four units to increase capacity or redundancy
- ABM technology optimises charging and extends battery life
- Integrated network management via SNMP and two communication slots
- Cold start function starts the supply from batteries without mains power
- Control and monitoring via a 5" touchscreen display
- ESS and Eco-mode increase operating efficiency to up to 99%
Performance, advanced management and monitoring
This power supply is based on an online double-conversion topology, which constantly regenerates the input voltage and sends a clean sine wave to the output without any fluctuations. The transfer time during a power outage is zero, so connected devices experience no interruption. The real power of 10000W corresponds to the apparent power of 10000VA. The total operating efficiency reaches 96%. To further reduce energy demands and heat loss, you can activate the Energy Saver System (ESS) or eco mode, where efficiency increases to up to 99%. A large 5" touchscreen display provides clear control and monitoring of operating states. The software also includes a function for the automatic and controlled shutdown of connected servers and systems in the event of a prolonged power failure, protecting data from loss.
Battery system of the Eaton UPS 93PS 10kW 3/3-phase uninterruptible power supply
The integrated battery system, consisting of a single string of 9Ah batteries, provides backup for 7 minutes at full power load. At half load, the backup time extends to 20 minutes. Advanced Battery Management (ABM) technology extends battery life by optimising charging cycles. The batteries are not user-replaceable. For longer backup times, the system can be expanded with external battery modules via a hardwired connection. The cold start function starts the UPS even without an input power supply.
Connectivity and connection
The UPS supports scalability and high availability. The system enables the parallel connection of up to four units, which increases the total capacity or creates an N+1 redundant configuration for enhanced reliability. Both input and output connections are hardwired. The device includes a potential-free relay contact for signalling statuses to external systems, such as industrial automation. Remote management and integration into monitoring systems are handled by an integrated network card with SNMP protocol support. Two free communication slots are available for future expansion of communication options.
Technical specification
- Ports: 1× integrated network card (SNMP), 2× free communication slots, 1× potential-free relay contact
- Operating modes: Online double-conversion, Energy Saver System (ESS), eco mode
Specifications
Performance
Efficiency
Backup time
Eaton Industries (France) SAS, 110 Rue Blaise Pascal - 38330 Montbonnot Saint-Martin - France, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
