FANATEC ClubSport Shifter SQ V1.5 with USB adapter
FANATEC ClubSport Shifter SQ V1.5 with USB adapter
The FANATEC ClubSport Shifter SQ V1.5 gaming controller allows shifting in both H-pattern and sequential modes. The package includes both gear knobs, which can be interchanged as needed. Mounting accessories are also included. The shifter supports calibration via the Fanatec App and through a compatible Fanatec steering wheel. It offers the ability to adjust the shifting resistance and switch between H-pattern and sequential shifting modes using a switch on the underside of the device. In sequential mode, the lever returns to the neutral position after each shift.
Key Features of the FANATEC ClubSport Shifter SQ V1.5 with USB adapter Gaming Controller
- Switch between H-pattern and sequential shifting modes
- Knobs for both shifting modes are included in the package
- Connects via the included ClubSport USB adapter
- Supports connection via RJ12 or RJ12–PS/2 cable
- Calibration via the Fanatec App or a compatible Fanatec steering wheel
- The FANATEC ClubSport Shifter SQ V1.5 gaming controller allows you to adjust the shifting resistance
- Supports both side and bottom mounting
- Mounting accessories are included in the package
Shifting Modes and Controls
To engage reverse or seventh gear, you need to press the gear stick down and select the appropriate gear simultaneously. The shifting resistance can be adjusted with a 5mm Allen key. The FANATEC ClubSport Shifter SQ V1.5 can be connected using the included ClubSport USB adapter and RJ12 cable. Alternatively, it can be connected to the Shifter 1 port of a compatible Fanatec base using an RJ12 cable. It also supports connection to the PS/2 port of a compatible Fanatec base via the included RJ12–PS/2 cable.
Connection, Calibration and Mounting
Calibration can be performed in the Fanatec App or via a compatible Fanatec steering wheel. If the device is not recognised correctly, the USB adapter mode can be changed via the Fanatec App or Firmware Manager. The ClubSport Shifter SQ V1.5 supports both side and bottom mounting methods. The included M5 T-nuts are intended for side mounting. For bottom mounting, four M6 screws are used.
Specifications
Platform
Inputs and outputs
Connections
Dimensions
Colour
Type
Packaging
Specifications can be changed without notice. Images are for illustrative purposes only.
