Intel DP67DE Deer Flat stepping B3

At the present time optimally equipped motherboard Reduced Micro ATX format, which amply serve for home office and multimedia applications, including gaming.It has a socket LGA 1155 for the installation of second-generation Intel Core i7/i5/i3 made innovative 32nm Sandy Bridge architecture.The included Intel P67 chipset supports the new SATA III interface and full-speed PCI Express 2nd0 interface, ie the 5 GT/s, where each of the supported 8 lines provide throughput up to 500 MB/s in both directions.Chipset does not support the use of integrated graphics core in the processor, so the board will need to furnish a separate graphics card, which is ready for PCI Express x16 bandwidth.The chipset is based on 3revision (B3 stepping), in which has been fixed for SATA controllers.

For memory on board prepared a total of 4 DIMM slots enable installation of DDR3 memory modules on the full native rate supported by an integrated memory controller in the CPU, up to 1333 MHz.Maximum allowable capacity is 32 GB.The support of two-channel connection.When installing hard drives and optical drives will have a choice of 4 SATA II and III, 2 SATA connectors.In the case of multiple connected drives can use a supported chipset Intel Rapid Storage for RAID 0,1,5 and 10Thanks to innovative UEFI BIOS can use hard disks with a capacity greater than 2TB.When using multimedia will appreciate multi-channel audio subsystem Intel High Definition Audio for two independent streams in the configuration of the seventh1 and 20 Realtek ALC892 codec uses.

Specifications:

Supported processors:
Series:Intel Core i7/i5/i3 (2ndgeneration Sandy Bridge)
Base:LGA 1155

Chipset:
Intel P67

Memory:
Type:DDR3
Slot:4x DIMM
Frequency:1066/1333 MHz
Connection mode:Dual-channel
Max.capacity:32 gigabytes

Video:
The need for a separate graphics card

Audio:
Realtek ALC892
7th1 + 2.0 Intel High Definition Audio

LAN:
Intel 82579V
10/100/1000 Mbit/s

Expansion Slots:
1x PCI Express 2nd0 x16
2x PCI Express 2nd0 x1
1x PCI

Internal interface:
2x SATA III (6 Gbit/s)
4x SATA (3 Gbit/s)
4x USB 20 connector (8 additional USB 2Port 0)
1x eSATA connector
1x FireWire connector
1 x S/PDIF output connector

External interfaces:
2x USB third0
6x USB 20
1x eSATA
1x FireWire
1x RJ-45
5x audio jack
1x Digital Optical S/PDIF

Design:
Micro ATX

Dimensions:
24.4 x 24.4 cm