Koch Micro Cut Abrasive Paste, polish with micro particles M3.02, 250 ml
- Reviews 1
- Help and manuals
- Ingredient
- Specifications
- Photos & Videos 5
- Accessories and suggested products
Koch Micro Cut Abrasive Paste, polish with micro particles M3.02, 250 ml
The KochChemie Micro Cut M3.02 polishing compound is part of the high-quality car care range from the German manufacturer, Koch-Chemie. It is the most advanced, final polishing paste with micro-particles, designed for machine polishing up to a 3000 grit finish. This abrasive paste does not contain silicone oil and has an extremely homogeneous abrasive grain. This allows you to achieve a very durable, radiant high gloss, even on dark shades and under extreme light conditions. It is suitable for all types of paintwork, including scratch-resistant ones. It is ideal for the permanent, mechanical removal of holograms, fine scratches, polishing and sanding marks, and sharp edges.
Key Features of KochChemie Micro Cut M3.02 Car Care
- A high-quality product from the German car care brand KochChemie
- Micro Cut M3.02 abrasive paste for machine polishing, containing micro-particles
- Allows for machine polishing up to a 3000 grit finish
- Micro-abrasive anti-hologram polish with an extremely homogeneous abrasive grain
- Silicone oil-free formula
- KochChemie Micro Cut M3.02 provides a high gloss, even on dark and sensitive shades
- Car care for removing holograms, fine scratches, polishing and sanding marks, and sharp edges
- KochChemie polish suitable for all types of paintwork, including scratch-resistant finishes
Area of Use:
Paintwork on cars, commercial vehicles, and motorcycles.
Cut Level:
3.2
Gloss Level:
9
How to Use:
Shake the product well before use and test for suitability and compatibility. Wash the surface to be treated and allow it to dry completely. Apply the polish to dry or new polishing pads, spreading it evenly over the entire surface of the pad. With the polisher still switched off, spread the polish in a thin layer over the paintwork. Then, using a rotary polisher, polish in a cross-hatch pattern with medium pressure until a transparent film is formed (until the aluminium oxide contained in the polish has completely broken down). Do not use the polishing pads used for this product for other products. To remove polish residue without scratches or marks, use a professional microfibre cloth. Protect from frost and excessive heat. Do not use on hot surfaces.
Tip:
For optimal results, the manufacturer recommends using a KochChemie Micro Cut Pad (purple) and a forced rotation orbital polisher (e.g., Makita PO5000C, at the highest speed) for polishing. Alternatively, a rotary polisher can be used in combination with a KochChemie Micro Cut Pad (purple).
Choose the optimal size of abrasive paste:
KochChemie Micro Cut M3.02 Micro-Abrasive Paste – 250ml
KochChemie Micro Cut M3.02 Micro-Abrasive Paste – 1000ml
eko GRADO spol. s r.o., Skyřická 110,43401 Most, [email protected], +420723691602
Specifications can be changed without notice. Images are for illustrative purposes only.
