AXAGON ADE-SR
AXAGON ADE-SR
The compact, high-speed AXAGON ADE-SR adapter easily converts a USB 3.0 port into a Gigabit Ethernet 10/100/1000Mbit port.
Wide range of features
In addition to gigabit throughput, the network card offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load with checksums, crossover detection and auto-correction, TCP large send offload, support for various Wake-on-LAN modes, working with VLAN, and advanced Power Management features.
Automatic installation
In modern operating systems from Windows 8.1 onwards, the adapter enables easy, automatic installation without needing an internet connection.
Fast connection
The gigabit network adapter upgrades your computer with a fast network connection, adds a missing RJ-45 network connector, provides an additional network card, or replaces a non-functional original network connection.
Simple connection
Support for current versions of Windows, Mac OS X, and Linux operating systems means it can be used with any desktop, laptop, or ultrabook. Some Android phones and tablets, such as the Samsung S9+, can also be connected to the internet with an Ethernet network cable using this adapter and a suitable reducer*.
Input:
• USB 3.0 interface, backwards compatible with USB 2.0 and USB 1.1.
• Supports transfer speeds of 12 / 480 / 5000Mbit/s (full / high / super speed).
• USB 3.0 Type-A male connector located on a 15cm cable permanently attached to the adapter.
Output:
• Gigabit Ethernet interface with an RJ-45 connector for connecting a UTP or STP cable.
• Supported Ethernet interface transfer speeds of 10/100/1000Mb/s.
• Supports IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, and IEEE 802.3ab 1000Base-T specifications.
• 10/100/1000Mb/s auto-detection.
• Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU load, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum checking and generation.
• Supports TCP Large Send Offload V1 and V2.
• Supports IEEE 802.1P Layer 2 priority encoding & decoding.
• Supports IEEE 802.1Q VLAN tagging.
• Supports IEEE 802.3az EEE (Energy Efficient Ethernet) – reduces power consumption when idle.
• Supports Jumbo frame.
• Supports full-duplex transfers with IEEE 802.3x flow control and half-duplex transfers with back-pressure flow control.
• Supports Auto MDI/MDIX – crossover detection and auto-correction eliminates the need for crossover cables.
• Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors.
• Supports pair swap/polarity/skew correction.
Other features:
• Full Plug and Play and Hot Plug support.
• CDC-ECM support – for automatic driver installation across different operating systems.
• Adapter is powered via the USB bus (bus power) – no additional power supply needed.
• Two LEDs indicate network activity and the adapter's connection to USB and the network.
• Dimensions 61×25×17mm, USB cable length 15cm, weight including USB cable 26g.
• Uses the Realtek RTL8153 chipset.
Wake-on-LAN support in various modes:
• Supports sleep mode and remote wake-up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, and Link Change Wake-up.
• Supports the ECMA-393 proxZzzy® for sleeping hosts standard for managing the network connection of sleeping hosts via proxy servers.
• RealWoW! technology support enables remote wake-up over the internet.
Advanced Power Management features:
The adapter supports advanced power management to reduce losses during idle or light network traffic. It also supports advanced power saving when the Ethernet cable is disconnected.
• Advanced Configuration Power management Interface (ACPI) support.
• Power Management offload (ARP & NS) support.
• Microsoft Always On Always Connected (AOAC) support.
• Intel Converged Platform Power Management (CPPM) support.
• Link Power Management (LPM) support.
• Operating System-directed Power Management (OSPM) support.
• IEEE 802.3az EEE (Energy Efficient Ethernet) support.
Supported operating systems:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32-bit and 64-bit versions of Windows OS are supported), Mac OS X 10.6 and higher, Linux with kernel 2.6.14 and higher, most versions of Android.
• (NOTE – check with your Android device manufacturer to see if an Ethernet connection is supported).
Package contents:
• USB to Gigabit Ethernet adapter with a permanently attached 15cm USB cable,
• multilingual manual.
* For devices with a micro USB connector, we recommend an OTG reducer; for devices with a USB-C connector, we recommend a USB-C>USB-A reducer such as the AXAGON RUCM-AFA.
Specifications
Use
Male connectors
Connector
Type and number of connectors
Standards
Cable construction
Features
Type
LAN parameters
Features
Specifications can be changed without notice. Images are for illustrative purposes only.
