
The ELÍZ electric instantaneous water heater can be used wherever there is no central hot water supply. The heater is designed for a pressureless connection for a single point of use with installation over a sink or kitchen sink. You can use it almost anywhere - in the home, at the cottage, social facilities and many other places. The ELÍZ EL 42 model has a covered heating element, so it is protected from the effects of limescale build-up.

Another great advantage of this heater is that the water is heated as it flows through the unit. This prevents heat loss. The indicator light allows you to check the heating in progress. A special non-pressure lever battery is also included, only with this supplied non-pressure battery the heater can be operated. The ELÍZ EL 41 flow heater is equipped with a total of 5 protection levels.
1. Protection against electric shock
2. Covered heating element
3. Overheating protection by water temperature control
4. Protection in case of pressure drop in the water supply
5. Protection against excessive pressure
Temperature and water flow at full output and inlet water temperature 12 °C:
45.4 °C - 1.5 litres. / min.
62,2 °C - 1 litre. / min.
With a lower inlet water temperature, the volume of hot water is correspondingly reduced.
Additional information:
Wattage:
3 500 W
Voltage:
230V
Insurance:
16 A
Electrical protection:
IP 24
Energy efficiency class:
A
Water connection (external thread):
G 1/2''
Operating water pressure:
0 bar
Min. switching pressure in the water pipe:
2 bar
Maximum pressure in the water pipe:
8 bar
Weight:
1,45 kg
Dimensions:
232 × 145 × 85 mm
ELÍZ – ohrievače vody s.r.o., Technická 7, 821 04 Bratislava, +420 725 881 505, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.