Ceresit Sanitary silicone CS 25 icy glow, 280 ml
Ceresit Sanitary silicone CS 25 icy glow, 280 ml
Ceresit CS 25 sanitary silicone is a top-quality acetate sealant designed to fill transition and joining joints between ceramic tiles and floor tiles. Thanks to its elasticity and high durability, it is ideal for use in bathrooms, kitchens, showers, balconies and terraces. The innovative formula with MicroProtect technology provides triple protection against mould and microorganisms, ensuring a long life and hygienic environment. Pprovides excellent adhesion to dry and non-absorbent surfaces such as glass, ceramics and porcelain. Its universal use includes both interior and exterior. It is durable and permanently elastic, does not crack, does not settle, can handle even places with material movement. High temperature resistance, ÚV, change of colour, corrosion, the cracks of aging, friction, water and moisture. Easy application.
Key features of Ceresit silicone CS 25 icy glow, 280 ml
- Top quality acetate sealant
- It is used to fill transition and connecting joints between ceramic tiles and paving
- Water, temperature and humidity resistant
- Usage can be used in bathrooms, kitchens, shower corners, balcony or terrace
- Protection against mould and microorganisms
- Long-term durability
- Excellent grip
- Universal use
- It is elastic
- Easy application
Volume:
0,58 l
Weight:
0,28 kg
Method of use:
Before application, the substrate must be prepared and made clean, dry, free of moisture and cleaned with solvent (glass, aluminium). It always remains elastic and is therefore recommended for compounds that are active. Joints must be secured with tape to prevent excess silicone from flowing over the joint surface. The tip of the funnel cap should be cut according to the width of the joint, applied directly to the surface of the joint with a silicone gun and then flattened with a spatula dipped in a mixture of soap and water. After application, remove the tape you used to prepare the joint. After application, ensure that the joints are level within 5 to 10 minutes. Undried material can be removed with solvent and dried parts can only be removed mechanically. Allow to dry for a minimum of 30 minutes and a maximum of 3 hours.
Specifications
Usage
Features
Technical data
Packaging
Henkel AG & Co. KGaA, Henkelstraße 67, 40589, Düsseldorf Deutschland, [email protected], +49 211 7970
Specifications can be changed without notice. Images are for illustrative purposes only.
