This page includes the most expensive drill Accessories BOSCH, or more specifically all products from the category drill Accessories BOSCH sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out.
651
Results
BOSCH Concrete drill bits CYL-3 8 × 80 × 120 mm, d 7.5 mm, 10 pcs 2.608.597.719
Drill Set - for masonry, concrete and stone, conical shape, clamping system cylindrical shank, 10 pieces per pack
BOSCH SDS plus-5 hammer drill 16 × 400 × 465 mm 1.618.596.259
Drill Bit - conical shape, for masonry, with a diameter of 16mm and a length of 465mm, SDS Plus mounting, made of Hard metal,
BOSCH SDS plus-5X hammer drill 25 × 200 × 250 mm 2.608.836.649
Drill Bit - conical shape, for masonry, with a diameter of 25mm and a length of 250mm, SDS Plus mounting, made of Hard metal,
BOSCH Metal drill bits HSS-Co, DIN 338 5,5 × 57 × 93 mm, 10 pcs 2.608.585.888
Drill Set - spiral, diameter 5,5 mm, length 93 mm, working length 57 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-Co
BOSCH Spline wrench up to 13 mm 1.608.571.062
Chuck on drill, three-jaw, toothed clamping, thread 1/2"-20UNF, minimum clamping diameter 1,5 mm and maximum clamping diameter 13 mm
BOSCH drill set. hss-g, 10 pcs 2.607.010.535
Drill Set - for metal and plastic, conical shape, clamping system cylindrical shank, 10 pieces per pack
BOSCH Extra soft sanding pads, 150 mm 2.608.601.114
Sanding Plate - for Bosch eccentric grinders, extra soft, disc diameter 150 mm
BOSCH Robust Line, L PH/PZ/T/S/HEX, Extra Hard version, 18+1 pieces 2.607.002.568
Bit Set - multi-type, cross-head PH, cross-head PZ, torx TX and hex H, hex 1/4" attachment, includes bit holder and 19 bits, in plastic organiser
BOSCH Twist Speed 10.0mm Metal Drills
Drill Bit - conical shape, for metal, for plastic, with a diameter of 10mm and a length of 133mm, Cylindrical Drill Bit mounting,
12,690 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC756v88
BOSCH SDS plus-5X hammer drill 24 × 200 × 250 mm 2.608.836.647
Drill Bit - conical shape, for masonry, with a diameter of 24mm and a length of 250mm, SDS Plus mounting, made of Steel,
BOSCH Metal Drill Bits Twist Speed 25pcs ProBox 2.608.577.352
Drill Set - spiral shape, for metal, for plastic, Circular shaft mounting, made of HSS ,
Discounted -15 %
12,540 Ft
14,750 Ft
In stock
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC756v04
BOSCH SDS plus-5X 18x250x300 Drill Bit
Drill Bit - conical shape, for masonry, with a diameter of 18mm and a length of 300mm, SDS Plus mounting, made of Steel,
12,390 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC809v51
BOSCH Metal drill bits HSS-G, DIN 338 6,8 × 69 × 109 mm, 10 pcs 2.608.595.069
Drill Set - spiral, diameter 6,8 mm, length 109 mm, working length 69 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-G
BOSCH Metal drill bits HSS-G, DIN 338 7 × 69 × 109 mm, 10 pcs 2.608.595.070
Drill Set - spiral, diameter 7 mm, length 109 mm, working length 69 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-G
HAMMER DRILL BITS SDS-MAX-4 18 X 200 X 340
Drill Bit - conical shape, for masonry, with a diameter of 18mm and a length of 340mm, SDS Max mounting, made of Steel,
BOSCH Mug brush, braided, 75, Stainless steel 2.608.622.060
Sanding Brush for angle grinder - pot, to remove rust, cleaning, on metal and sheet metal, material steel, braided wire, max. 12500 rpm, clamping with M14 thread, brush diameter 75 mm
BOSCH Hammer drill SDS plus-3 20 × 400 × 450 mm 2.608.831.055
Drill Bit - conical shape, for masonry, with a diameter of 20mm and a length of 450mm, SDS Plus mounting, made of Steel,
BOSCH SDS plus-5X hammer drill 15 × 400 × 460 mm 2.608.833.824
Drill Bit - conical shape, for masonry, with a diameter of 15mm and a length of 460mm, SDS Plus mounting, made of Steel,
BOSCH Set Metal drill, HSS-G, 1-10mm, 19pcs 2.608.587.013
Drill Set - spiral shape, for metal, for plastic, Circular shaft mounting, made of HSS-G,
BOSCH Dry Speed diamond drill bit 2.608.599.040
Crown Drill Bit - conical shape, for ceramics, for tiling, M14 mounting, made of Diamond,
BOSCH Double-sided drill bits 4.2 × 14 × 55 mm, 10 pcs 2.608.597.590
Drill Set - cylindrical, diameter 4.2 mm, length 55 mm, working length 14 mm, determination of metal, plastic and cast iron, clamping cylindrical shank
BOSCH set SDS plus-5 6,6,8,8,10 x 165mm, RL 2.607.019.928
SDS-plus Drill Bit Set 5-part for hammers, concrete, stone, 6-10 x165mm
BOSCH Drill SDS plus-5 14x550x615 Drill Bit
Drill Bit - conical shape, for masonry, with a diameter of 14mm and a length of 615mm, SDS Plus mounting, made of Steel,
Discounted -10 %
11,600 Ft
12,890 Ft
In stock
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC748v52
BOSCH Hard grinding wheels, 150 mm 2.608.601.053
Sanding Plate - for Bosch eccentric grinders, hard, disc diameter 150 mm
Chcete doručit do České republiky? Jdi na
Příslušenství k vrtačkám
Chcete doručiť tovar na Slovensko? Prezrite si
Príslušenstvo k vŕtačkám
Für den Versand nach Deutschland, besuchen Sie bitte
Zubehör für Bohrer
Für den Versand nach Österreich, besuchen Sie bitte
Zubehör für Bohrer
