Water ID PoolLab 2.0 Photometer for Water Quality Measurement
Water ID PoolLab 2.0 Photometer for Water Quality Measurement
The PoolLab 2.0 photometer is an easy-to-use tool for home pool maintenance. It provides precise measurements of chemical levels in your pool water, helping you prevent problems and keep the water clean and healthy. Thanks to a fixed but replaceable triple measuring cuvette, you can take a sample quickly just by immersing the IP67 waterproof PoolLab device in the water. Nine buttons give you direct access to the ZERO operation (only needed once for each measurement batch) and to 22 different pool water parameters. The PoolLab 2.0 photometer has a built-in WiFi interface that allows for either an active connection to the free LabCom software and app or automatic data synchronisation with the LabCom Cloud.
Key features of the WATER I.D. PoolLab 2.0 water quality photometer
- Measures 3 parameters in parallel
- WiFi
- Large colour display (2.4" with backlight)
- Replaceable cuvette
- IP67 waterproof
- 22 pool parameters at 4 wavelengths
- 9 buttons for direct access
Text section heading
Test results are always assigned to measurement source accounts created individually by the user. In the LabCom software and app, you can print reports, calculate the active chlorine content, and even get dosing recommendations based on individually entered water treatment products. The LSI index calculation is also offered via the software and app. The free cloud service, which the PoolLab 2.0 Photometer can automatically synchronise data with via WiFi, ensures that the software and app always work with the same database.
Basic kit:
1× PoolLab 2.0 photometer with WiFi IP67 waterproof, 1× triple measuring cuvette (replaceable), 1× light shield, 3× plastic stirring rods, 1× 10ml syringe, 3× AA batteries, 1× printed user manual, 1× collection bag, free LabCOM software, free LabCOM app, free LabCOM Cloud service
Reagents:
20 Phenol Red tablets, 20 DPD N° 1 tablets, 10 DPD N° 3 tablets, 10 Alkalinity-M tablets, 10 CYA-Test tablets
All tablets are photometric grade.
Glycine reagent tablets are not included in the basic kit.
Parameters:
ACT, AMM, ALU, TA, BRO, FCL - CLA, FCL, CLHR, CLO2, CYA, IRON, CH, TH, POT, FCU, NTRA, NITRI, OZON, PH, PHMB, PPLR, PPHR, SULF, HYDL, HYDH, ZINC, UREA
Specifications
Features
Water-i.d.® GmbH; Daimlerstr. 20 76344 Eggenstein Germany; +49 (0) 721-782029-0; [email protected]; https://www.water-id.com/en
Water-i.d.® GmbH, Daimlerstr. 20, 76344 Eggenstein, Germany, Tel. +497217820290, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
