Verk 01639 Lever pulse foil welder PFS-300T
Verk 01639 Lever pulse foil welder PFS-300T
Lever impulse foil welder Verk 01639 is designed for welding of bags and foils. The width of the heating string is about 30 cm. Heating is switched on automatically after pressing the top part and switches off automatically after a set time interval. The heating time of the resistance wire is set by a potentiometer according to the material of the plastic to be welded and its thickness. The maximum weld length is 300 mm.
Key features of the lever pulse foil welder PFS-300T Verk 01639
- Lever Welding Machine
- Designed for welding bags and foils
- Width of heating string 30 cm
- With automatic on and off
- Set the heating time of the resistance wire with the potentiometer
Output power:
400 W
Length of heating section:
300 mm
Width of fusible wire:
2 mm
Compatible fusible wire widths:
0.5 mm, 2 mm, 3 mm, 4 mm
Timer:
0,2-2 s
Supply voltage:
230 V / 50 Hz
Warning:
Although the length of the welding string of the welding machine reaches the declared length, it is not entirely realistic to weld bags of the same length efficiently. The operator would have to position the bag very precisely so that the edges of the foil were accurately placed on the fusing string, which would greatly increase the time required for welding. If everything was not precisely positioned, the edges would not be properly welded and the resulting weld would not be watertight. In addition, the bags/sleeves do not always have the exact width as stated by the manufacturer. Therefore, it may happen that a 200 mm wide foil sleeve may be 203 mm wide, for example, and this alone would make it unrealistic to produce a watertight weld. Therefore, always choose a foil welder with sufficient reserve. However, the reserve should not be unnecessarily high, as the fusible wire, including the Teflon fabric and silicone pressure pad, overheats unnecessarily in places where welding does not take place. For example, a welder with type marking 400 (and therefore a string length of 40 cm) is completely inappropriate for working with 10 cm wide bags.
Specifications
Type
Features and functions
Dimensions and weight
VERK GROUP SIKORSKI SP.K., WYGODY 16, 05-090, PODOLSZYN NOWY, Poland, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
